Categories
Hot Products
Description
This machine tool is mainly used for rubber wood processing (especially short material processing) in the finger-jointed panel industry, and the fastest processing speed is 60m/min.
The lifting and lowering of the cutter shaft on the machine tool and the advance and retreat of the left vertical shaft are driven by servo motors and driven by ball screws, with high precision and high efficiency. Touch screen + PLC control, abnormal information detection, friendly interface, quick and easy operation.
Main technical parameters of the machine tool
| Name | Unit | QMBK618GH | |
| Maximum planing width (tool outer diameter Φ125) | mm | 180 | |
| Minimum planing width | mm | 25 | |
| Maximum planing thickness (cutter shaft outer diameter Φ125) | mm | 110 | |
| Minimum Planing Thickness | mm | 15 | |
| Minimum planing length | discontinuous feeding | mm | 500 |
| continuous feeding | mm | 180 | |
| The maximum lifting range of the movable workbench | mm | 6 | |
| Maximum movement of movable guide plate | mm | 5 | |
| Feeding roller diameter | mm | Φ140 | |
| Feeding speed | m/min | 10-60 | |
| Rotational speed of the first lower cutter shaft | r/min | 6800 | |
| Rotational speed of other cutter shafts | r/min | 8000 | |
| Tool shaft axial movement | Upper and lower cutter shaft | mm | 10 |
| Left and right vertical knife shaft | mm | 10 | |
| Tool rotation diameter | First down, upper knife shaft flat knife | Φ125 | |
| The rest of the shafts are flat knives | Φ125-150 | ||
| The second lower knife side knife (outer diameter X thickness) | Φ152-182x12 | ||
| Motor total power (50kw) | Upper cutter shaft | kw | 2x7.5 |
| Other spindles | kw | 4x5.5 | |
| Feeding motor | kw | 11 | |
| lift motor | kw | 0.75 | |
| Upper pressure roller conveyor motor | kw | 1.1 | |
| Air pressure | MPa | 0.3-0.8 | |
| Chip removal tube diameter | 7xΦ120 | ||
| Compressed air required | m3/min | 0.15 | |
| Dimensions (length x width x height) | cm | 425x170x175 | |
| Machine weight | kg | 5100 | |
Message
If you have any suggestions or question for us.Please contact us.